English EUR 
Dansk DKK 
Norsk NOK 
Suomeksi EUR 
Svenska SEK 
Svenska EUR 
Programming > Micro:bit >
Servo motor 180° for micro:bit
Build, for example, a simple analogue thermometer by fitting a pointer on the motor shaft. Then, let micro:bit record the air temperature and steer the pointer to a specific angle.
| 7.10 EUR | (8.88 EUR incl. vat) |
|
|
Delivery - immediate
|
Build, for example, a simple analogue thermometer by fitting a pointer on the motor shaft. Then, let micro:bit record the air temperature and steer the pointer to a specific angle.
From a micro:bit, the servo motor's shaft can be steered to any angle in the range 0–180°. For example, use the micro:bit's temperature sensor to build an analogue thermometer or use the micro:bit's built-in gyro to control the servo to stabilise a suspension mounting. Only your imagination sets the limits...
Ready-to-use programming blocks for controlling servo motors can be found at makecode.microbit.org.
Micro:bit v2 delivers sufficient current to operate one or two motors. If several motors are to be operated, an external voltage source should be connected.
A convenient way of connecting motors to micro:bit is to use a sensor:bit (art. no. 11927).
Operating voltage: 3.0–5.5 V.
Rotation angle: 0–180°.
Material: Plastic.
Dimensions: 32x12x27 mm.
Accessories: 3 different adapters that are screwed onto the motor shaft.
Handledningar och andra resurser till micro:bit - sagitta.se/microbit (svensk)
-
Servo motor 180° for micro:bit
-
Clapper with nut
-
Askorbinsyra L- PS 500 g
-
Resistance box
-
Conical flask 5000 ml
-
N-Amylalkohol PS 1 l
-
Vacuum bell jar with bell
-
Battery R20/D pack of 12
-
Large C Clamp (6 Pack)
-
Graduated cylinder, plastic 25 ml, pack of 10